|
Product Details:
|
| Table Size: | 500*600 （mm） | Max. Specimen Weight: | 50 Kg |
|---|---|---|---|
| Max. Acceleration: | Half Sine: 600G | Machine Dimension: | 1150*1050*2450 (mm) |
| Controller: | SKC-2 | Waveform Generator: | Half Sine Wave/final Peak Saw Tooth Wave |
| High Light: | shock test machine,shock test equipment |
||
Hydraulic Shock Test System, Reliability and Package Testing Equipment Half Sine Wave
Shock Test Systems
Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. To do a boundary assessment on complete product breakage, industrial standard shock pulse or company’s internal standards, we can provide the most advanced shock test system to meet your application requirements.
Suitable shock tests for aviation, aerospace, marine, military, consumer electronics, automobiles, home appliances and display devices.
By selecting different waveform generators, it can perform half sinusoidal wave, sawtooth wave, or trapezoidal wave.
Main parameters
| Operating platform | 500 × 600 mm |
| Max. load | 50 KG (up to 100kg) |
| Peak acceleration | Half sine wave: 20 to 600G Final peak saw tooth wave: 30 to 100G |
| Pulse duration | Half sine wave: 1 to 30 ms Final peak saw tooth wave: 6 to 18ms |
| Acceleration allowance | ≤ 10% |
| Rate of speed change | ≤ 10% |
| Transverse ratio of table | ≤ 10% |
| Equipment dimensions | 1300×1150×2600 mm |
| Equipment weight | 2300 kg |
| Measuring system | |
| Input channels | 2 channels |
| Sampling frequency | 192KHz |
| Pulse duration | 0.5 to 100ms |
| Max. acceleration | 5000G |
| Communication interface | USB2.0 |
| Supportive standard | ISO, UN38.3,MIL-STD-810, user defined |
| Operating system | Windows 10 |
| System acceleration sensor | |
| Brand | B&W |
| Model | 22100 |
| Output mode | Charge type |
| Sensitivity | 4pC/g |
| Frequency range | 0.5 to 12KHz |
| Acceleration range | ±2500G |
| Operating environment | -40 to +160℃ |
| Other information | |
| Power supply | AC, three phase, 380V±10% 5KVA |
| Compressed air | 0.5 to 0.8Mpa |
| Temperature | RT~40℃ |
| Humidity | 25℃, ＜ 85RH% |
| Safety | Mean time between failure≥ 5000 hours; Continuous use of half sine waveform generator≥ 8000 times, Storage time in clean environment at normal temperature≥ 5 years. |
| Applicable standards | GB2423.5, GJB150.18, GJB360.23,UN38.3,IEC68-2-27, MIL—STD202F, MIL-STD810B, GB/T18287, etc. |
| Testing standard | JG541-2005 |
Features
a. Free drop type shock tester using hydraulic lifting and HP fluid braking.
b. Use of pneumatic-hydraulic boosting and strong friction brake to prevent secondary shock braking.
c. Shock measurement device: single-channel data acquisition, simultaneous acceleration data
measurement, storage, report printing, data callback, database management of two channels.
d. Use of rubber module, producing a wide range of half sine pulse with arbitrary action time.
e. Availability for equivalent drop test of packing boxes.
Equipment configuration
| No. | Equipment name | Model | Qty. |
| 1 | Shock test system | SKT50 | 1 set |
| 2 | Hydraulic lifting mechanism | 1 set | |
| 3 | Controller | SKC-2 | 1 set |
| 4 | Shock measurement device | 1 set | |
| 5 | Sensor | 1PCS | |
| 6 | Control computer | 1 set | |
| 7 | Waveform generator | Half sine wave/final peak saw tooth wave | 1 set |
| 8 | Safety device | Audible and visual alarm | 1 set |
| 9 | Attached accessories | Tools, clamps/instructions, installation disc, etc. | 1 set |
Schematic diagram
Export Package
Workshop:
Contact Person: Mr. Labtone
Fax: 86-769-85370093
