|
Product Details:
|
| Rated Force: | 2200 Kg | Max. Velocity: | 200 Cm/s |
|---|---|---|---|
| Maximum Displacement: | 100 Mm | Cooling Method: | Air Cooling |
| Payload: | 500 Kg | Power Amplifier: | 3-phase AC 380V 50Hz |
| Name: | ISTA 6 Amazon Electrodynamic Shaker Vibration Test Machine For Transportation Test | ||
| Highlight: | electrodynamic vibration shaker system,vibration testing equipment |
||
ISTA 6 Amazon Electrodynamic Shaker Vibration Test Machine for Transportation Test
The drive signal from the Digital Signal Processing Controller is input to the amplifier. The Amplifier takes the low voltage (0-5 volts and milliamps) from the controller and converts it to higher voltages and currents (0-100+ volts and hundreds or thousands of amps) for the shaker.
The armature of the shaker is suspended in a strong magnetic field. The current from the amplifier flows through the driving coil attached to the moving element. A force is generated on the wire by the current flowing through the wire in a magnetic field. The suspended moving element is restrained and allowed to move only in axial direction. The motion of the table follows the characteristics of the current through armature driving coil. Sinusoidal current produces a sinusoidal motion, random currents produce random motion.
The movement of the table is sensed by the accelerometer (pick up transducer). In case of using charge accelerometer, it produces a charge measured in pc (10
coulombs). The signal conditioner or charge amplifier coverts the charge signal to a normalized voltage one for the controller. This can be anywhere from 1mV/g to 1000 mV/g. The conditioned signal is feed into the closed control loop from the charge amplifier to a pre-defined reference level. The controller continually adjusts the drive signal to the amplifier to maintain the reference level.
| Shaker Specifications | |
| Peak Sine (Pk) | 2400Kg.f peak (24KN) |
| Random (RMS) | 2200Kg.f rms (22KN) @ISO5344 |
| Shock (Pk) | 4400Kg.f peak (44KN) @6ms |
| Usable Frequency | 1～3000Hz |
| Maximum Displacement (p-p) | 100mm (4inch) |
| Max. velocity | 2.0m/s |
| Max. acceleration | 70g |
| Vertical Load Support | 400 kg |
|
Body Suspension Natural Frequency (Thrust Axis) |
Less than 2.5 Hz |
| Armature Diameter | Ф340 mm |
| Armature Weight | About 30kg |
|
Fundamental Resonance Frequency (Bare table) |
2,500 Hz (nom.) +/- 5% |
|
Load Attachment Points (Standard) |
21stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 1190mmL×900mmD×1060mmH |
| Power Amplifier Specifications LA20K | |
| Rated Output Capacity | 22KVA |
| Signal to Noise Ratio | Greater than 65 dB |
| Amplifier Efficiency | Greater than 90% |
| Amplifier Overall Dimensions | 650mmL×920mmD×1780mmH |
Electrodynamic Shaker Vibration Testing Machine Services
Presales:
In-Sales:
After-Sales:
Electrodynamic Shaker Vibration Testing Machine Pictures:
Contact Person: Mr. Labtone
Fax: 86-769-85370093
