|
Product Details:
|
| Model: | HSKT30 | Table Size: | 510 X 510 |
|---|---|---|---|
| Specimen Max Weight(kg): | 10 | Shock Pulse: | Half Sine |
| Acceleration Range (m/s2): | 20----30000 | Pulse Duration Range (ms): | 0.2~11 |
| High Light: | mechanical testing equipment,vibration and shock testing |
||
Mechanical Shock Test Equipment for Half Sine 30000g Shock Test With Shock Amplifier
We ultimately recommend the most suitable system configuration for every testing application based on two important criteria:
High acceleration shock testing systems specifications:
| Model | HSKT10 | HSKT10D | HSKT15 | HSKT30 | HSKT35 |
| Table Size(mm) | 200 x 250 | 300 x 300 | 250 x 250 | 250 x 250 | 250 x 250 |
|
Max. Payload
(kg)
|
10 | 25 | 10 | 10 | 10 |
| Shock Pulse | Half Sine Wave | ||||
| Acceleration Range(G) |
20~2000
(bare table)
|
20~10000 (bare table) |
20~15000 (bare table) |
20~30000 (bare table) |
20~35000 (bare table) |
| Pulse Duration(ms) | 0.2~18 | 0.1~11 |
|||
Mechanical Shock Test Equipment Specifications:
|
Model
|
SKT30
|
SKT50
|
SKT100
|
SKT200
|
SKT300
|
SKT600
|
SKT1000
|
|
|
|
Table Size (cm)
|
40 x 40
|
50 x 60
|
70 x 80
|
100 x 100
|
120 x 120
|
150 x 150
|
200 x 200
|
|
|
|
Max. Specimen Weight(kg)
|
30
|
50
|
100
|
200
|
300
|
600
|
1000
|
|
|
|
Max.
Acceleration (G)
|
Half Sine
|
600
|
600
|
600
|
500
|
500
|
300
|
300
|
|
|
Saw-tooth
|
100
|
100
|
100
|
100
|
100
|
100
|
100
|
|
|
|
Square
|
|
150
|
150
|
150
|
100
|
100
|
100
|
|
|
|
Pulse duration
(ms)
|
Half Sine
|
30—0.5
|
30～1
|
30～1
|
30～2
|
20～3
|
20～3
|
20～3
|
|
|
Saw-tooth
|
18～6
|
18～6
|
18～6
|
18～6
|
18～6
|
16～6
|
18～6
|
|
|
|
Square
|
|
30～6
|
30～6
|
30～6
|
30～6
|
30～6
|
30～6
|
|
|
|
Machine dimension(cm)
|
120*110*245
|
130*140*260
|
130×120×260
|
150×130×260
|
200×160×300
|
230×180×310
|
250×220×310
|
|
|
|
Controller cabinet dimension(cm)
|
W55*D50*H80
|
||||||||
|
Machine weight(Kg)
|
1900
|
2300
|
3200
|
4200
|
8500
|
15500
|
21500
|
|
|
|
Power supply
|
3(phase) AC380V 50/60Hz Compressed air 0.5～0.8MPa
|
||||||||
|
Standards
|
GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F IEC-68-2-27 MIL-STD-883E MIL-
|
||||||||
Test Item Size
Each customer has unique requirements for their dynamic testing equipment. It is important to know the size and weight of test items to correctly configure the appropriate testing equipment. The size of your largest test item will help determine the table surface area. The maximum payload will help determine the shock system performance category.
Shock testing levels vary significantly depending on the product you are evaluating or the conditions you are simulating. The two most important shock performance criteria are velocity change and acceleration level. It is also important to know the shock pulse waveforms—half sine, sawtooth, or trapezoidal.
The precise-type high-acceleration shock tester can provide all half-sine short wave specification specified in JESD22-B110. To meet them, merely change different shock rubber-pad on shock seat. The wave is complete with high repeatability, able to provide user accurate test result.
Conform to different test specs such as JESD22-B110 and IEC spec.
Mechanical Shock Test Equipment Services
Presales:
· Technical consultation: test method, laboratory planning and suggestion.
· Equipment selection: selection scheme, FAQ.
· Product testing scheme.
In-Sales:
· Customer communication and progress report.
· Guidance for pre-installation preparation, equipment commissioning and test run.
· Calibration (when Third Party’s verification is required).
After-Sales:
· Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
· Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
· Technical support: special paid services are provided according to customer’s needs.
Contact Person: Mr. Labtone
Fax: 86-769-85370093
