|Table Size:||200 X 250||Specimen Max Weight(kg):||10|
|Shock Pulse:||Half Sine Wave||Acceleration Range (m/s2):||20-5000|
|Pulse Duration Range (ms):||0.2~18||Power Supply:||AC 380V 50Hz|
380V Mechanical Shock Test Equipment,
GJB150 Mechanical Shock Test Equipment,
Electrolytic Capacitor Shock Test Machine
AC 380V Mechanical Shock Test Equipment Perform 3000G
|Main parameters of the shock tester|
|Table size||200 × 250 mm|
|Max. load||10 KG|
|Pulse duration||0.3~18 ms|
|Equipment weight||1600 kg|
|Power & Air supply||AC380V±10％ 50Hz,1KVA & 0.5-0.8 MPa|
|Input channels||2 channels|
|Sampling frequency||192 KHz|
|Input mode||Voltage, Charge|
|Coupled mode||AC, DC, ICP|
|Supportive standard||GB, GJB, MIL-STD, ISO, IEC, user defined|
Introduction of shock test machine
a Working platform (Table)
High strength imported aluminum alloy working platform.
b lifting mechanism
PLC control servo motor drive ball screw to raise working platform.
c Lifting height control
The height of lifting is measured by the photoelectric encoder module installed on the base.
The photoelectric encoder measurement has high precision, strong anti-interference ability and
high reliability, which ensures the repeatability of impact
d Brake System
Adopt the gas-liquid supercharged brake force friction lock to prevent the secondary backlash.
e Buffer System
Effectively reduce the impact on the ground. The self - cushioning system is designed with base, damper and air bag.
f Waveform Generator
Half sine waveform generator: Wool felt, polyurethane, ect.
h Safety device
Emergency stop switch: Cut off the circuit in emergency situations such as by welding the contacts of the forced opening mechanism.
One year limited warranty with lifetime support; extended warranty available upon request at additional cost.
On site installation and trainning are avaiable at extra cost.
Certificate: China official third-party calibration report / CE Certification
When a fault report is received from customer〈including telephone, fax and email〉:
LABTONE will respond within 4-8 hours (working time), provide solutions and eliminate faults within 12-24 hours. After the equipment's guarantee period ended, supplier still has obligation to provide users with technical supports and after-sales services.
Contact Person: Mr. Labtone