|
Product Details:
|
| Table Size: | 20 X 25 Cm | Shock Pulse: | Half Sine |
|---|---|---|---|
| Max. Specimen Weight: | 10 Kg | Acceleration Range: | 20~2000 G |
| Pulse Duration: | 0.2~18 Ms | Machine Weight: | 820 Kg |
| High Light: | shock and drop testing,vibration and shock testing |
||
10kg Load Shock Test Equipment for Electronic Component Module1500g 0.5ms
Introduction to the shock measuring system and its features
The system conforms to MIL-STD-810, GJB-150-18-86 and IEC68-2-27 standards, and has accurate and prompt shock wave capture capability. The max. sampling rate is 1MHz, therefore, you need not worry about omission of minor shock events.The system is also an integrated solution, you need not be busy with waveform viewing and recording, as the system can capture shock event and generate report, more importantly, the system can provide you with shock response spectrum analysis (SRS) to facilitate effective assessment of potential damage from shock pulse to the actual system. At last, the auxiliary analysis on force deformation and shock response can enable to understand more details about the shock results.
Specifications
| Model | HSKT10 | HSKT30 |
| Table size (mm) | 200x250 | 300x300 |
| Shock pulse | Half sine | |
| Maximum Specimen Weight(Kg) | 10 | 30 |
| Acceleration Range(G) | 20 ~ 2000 | 20 ~ 1500 |
| Pulse Duration (ms) | 0.2~18 | 0.5~30 |
| Machine Dimension(mm) | 660x700x2380 | 720x680x1890 |
| Utility Requirements |
AC220V 50Hz 5A,Air pressure: more than 0.5Mpa | |
| Machine Weight(Kg) | 820 | 650 |
UN38.3, MIL-STD-202F, IEC-68-2-27, MIL-STD-883E, MIL-STD-810F, ISTA, UL
Features
Shock testing System Block Diagram
Presales:
In-Sales:
After-Sales:
Reference Pictures
Contact Person: Mr. Labtone
Fax: 86-769-85370093
